R211x-HP Flexfabric 11900 MPLS Command Reference

223
Table 82 Command output
Field Descri
p
tion
Interface Layer 2 Ethernet interface or Layer 2 aggregate interface.
Encapsulation
Match criteria of the service instance. If no match criteria are configured, the field is
blank.
Xconnect-group Name of the cross-connect group bound to the service instance.
AD connection
Name of the auto-discovery cross-connect bound to the service instance, identified by
the local and remote site IDs.
Related commands
service-instance
display l2vpn xconnect-group
Use display l2vpn xconnect-group to display cross-connect group information.
Syntax
display l2vpn xconnect-group [ name group-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name group-name: Displays information about the cross-connect group specified by its name, a
case-sensitive sting of 1 to 31 characters. If no group is specified, the command displays information
about all cross-connect groups.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Examples
# Display brief information about all cross-connect groups.
<Sysname> display l2vpn xconnect-group
Total number of cross-connections: 3, 0 up, 3 down, 0 admin down
Xconnect-group Name Connection ID MTU State
abc 0 1500 Down
vpn1 2 1500 Down
vpn2 1 1500 Down