R211x-HP Flexfabric 11900 MPLS Command Reference

235
To apply a new policy to inbound sessions, execute this command with the import keyword. BGP
advertises a route-refresh message to the peer and the peer resends its L2VPN information. After
receiving the L2VPN information, BGP uses the new policy to filter the L2VPN information.
This command requires that both the local router and the peer support route refresh.
Examples
# Soft-reset all inbound L2VPN BGP sessions.
<Sysname> refresh bgp all import l2vpn
reset bgp l2vpn
Use reset bgp l2vpn to reset L2VPN BGP sessions.
Syntax
reset bgp { as-number | ip-address | all | external | group group-name | internal } l2vpn
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
as-number: Resets L2VPN BGP sessions to the peers in the AS specified by its number in the range of 1
to 4294967295.
ip-address: Resets the L2VPN BGP session to the specified peer.
all: Resets all L2VPN BGP sessions.
external: Resets all L2VPN EBGP sessions.
group group-name: Resets L2VPN BGP sessions to the peers in the peer group specified by its name, a
case-sensitive string of 1 to 47 characters.
internal: Resets all L2VPN IBGP sessions.
Usage guidelines
A reset operation enables BGP to update L2VPN information by reestablishing BGP sessions, which
results in a short-time BGP session interruption.
Examples
# Reset all L2VPN BGP sessions.
<Sysname> reset bgp all l2vpn
revertive
Use revertive to specify whether to switch traffic from the backup PW to the primary PW when the
primary PW recovers, and the wait time for the switchover.
Use undo revertive wtr to restore the default wait time of 0.
Use undo revertive never to restore the default.