R211x-HP Flexfabric 11900 MPLS Command Reference

238
Examples
# Configure the route reflector to reflect only the BGP L2VPN information that contains the extended
community number 10.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family l2vpn
[Sysname-bgp-l2vpn] rr-filter 10
service-instance
Use service-instance to create a service instance on an interface, and enter service instance view.
Use undo service-instance to delete a service instance.
Syntax
service-instance instance-id
undo service-instance instance-id
Default
No service instance is created on an interface.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
instance-id: Specifies the ID of the service instance, in the range of 1 to 4096.
Examples
# Create service instance 1 on the Layer 2 Ethernet interface Ten-GigabitEthernet 1/0/1 and enter
service instance 1 view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] service-instance 1
[Sysname-Ten-GigabitEthernet1/0/1-srv1]
Related commands
display l2vpn service-instance
shutdown
Use shutdown to disable a cross-connect group.
Use undo shutdown to restore the default.
Syntax
shutdown