R211x-HP Flexfabric 11900 MPLS Command Reference

241
Views
Auto-discovery cross-connect view
Predefined user roles
network-admin
mdc-admin
Parameters
tunnel-policy-name: Specifies a tunnel policy by its name, a case-sensitive string of 1 to 19 characters.
Usage guidelines
The PWs on the auto-discovery cross-connect use the referenced tunnel policy to select public tunnels.
If no tunnel policy is referenced or the referenced tunnel policy does not exist, the PWs use the default
policy that selects only one public tunnel in this order: LSP tunnel, CRLSP tunnel.
Examples
# Reference the tunnel policy policy1 for the auto-discovery cross-connect in the cross-connect group bbb.
<Sysname> system-view
[Sysname] tunnel-policy policy1
[Sysname-tunnel-policy-policy1] quit
[Sysname] xconnect-group bbb
[Sysname-xcg-bbb] auto-discovery bgp
[Sysname-xcg-bbb-auto] site 2 range 10 default-offset 0
[Sysname-xcg-bbb-auto-2] connection remote-site-id 3
[Sysname-xcg-bbb-auto-2-3] tunnel-policy policy1
Related commands
tunnel-policy
vpn-target
Use vpn-target to configure route targets for a cross-connect group.
Use undo vpn-target to remove the specified or all route targets for a cross-connect group.
Syntax
vpn-target vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ]
undo vpn-target { vpn-target&<1-8> | all } [ both | export-extcommunity | import-extcommunity ]
Default
No route targets are configured for a cross-connect group.
Views
Auto-discovery cross-connect group view
Predefined user roles
network-admin
mdc-admin