R211x-HP Flexfabric 11900 MPLS Command Reference

250
Peer preferred value: 0
Routing policy configured:
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 600 0 0 0 0 00:00:05 Idle
Table 85 Command output
Field Descri
p
tion
Type
Type of the peer group:
• external—EBGP peer group.
• internal—IBGP peer group.
Maximum number of
prefixes allowed
This field is ignored in BGP L2VPN.
Threshold This field is ignored in BGP L2VPN.
Peer preferred value This field is ignored in BGP L2VPN.
Routing policy configured This field is ignored in BGP L2VPN.
MsgRcvd Number of messages received from the peer.
MsgSent Number of messages sent to the peer.
OutQ Number of messages to be sent to the peer.
PrefRcv Number of label block messages received from the peer.
display bgp l2vpn auto-discovery
Use display bgp l2vpn auto-discovery to display VPLS PE information maintained by BGP.
Syntax
display bgp l2vpn auto-discovery [ peer ip-address { advertised | received } [ statistics ] |
route-distinguisher route-distinguisher [ pe-address ip-address [ advertise-info ] ] | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
peer ip-address: Specifies a BGP peer by its IP address.
advertised: Displays VPLS PE information advertised to the BGP peer.