R211x-HP Flexfabric 11900 MPLS Command Reference

276
pw1 Ethernet Enabled - -
pw2 VLAN Disabled - -
Table 107 Command output
Field Descri
p
tion
VCCV CC
VCCV CC type. This field is not supported in the current software version and is
reserved for future support.
VCCV BFD
VCCV BFD type. This field is not supported in the current software version and is
reserved for future support.
Related commands
pw-class
display l2vpn service-instance
Use display l2vpn service-instance to display Ethernet service instance information.
Syntax
display l2vpn service-instance [ interface interface-type interface-number [ service-instance instance-id ] ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Displays service instance information for the specified Layer 2
Ethernet interface or Layer 2 aggregate interface. If no interface is specified, the command displays
service instance information for all Layer 2 Ethernet interfaces and Layer 2 aggregate interfaces.
service-instance instance-id: Displays information about the service instance specified by its ID in the
range of 1 to 4096. If interface interface-type interface-number is specified without this option, the
command displays information about all service instances on the specified Layer 2 Ethernet interface or
Layer 2 aggregate interface.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Examples
# Display brief information about all service instances.
<Sysname> display l2vpn service-instance
Total number of service-instances: 8, 8 up, 0 down
Total number of ACs: 5, 5 up, 0 down
Interface SrvID Owner LinkID State Type
XGE1/1/3 1 vpls1 1 Up VPLS