R211x-HP Flexfabric 11900 MPLS Command Reference

285
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] pwsignaling ldp
[Sysname-vsi-vpn1-ldp] peer 4.4.4.4 pw-id 200 no-split-horizon
[Sysname-vsi-vpn1-ldp-4.4.4.4-200]
# Configure a static PW for the VSI vpn1 and enter VSI static PW view: specify the peer PE address as
5.5.5.5, set the PW ID to 200, incoming label to 100, and outgoing label to 200, and disable split
horizon forwarding for the PW.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] pwsignaling static
[Sysname-vsi-vpn1-static] peer 5.5.5.5 pw-id 200 in-label 100 out-label 200
no-split-horizon
[Sysname-vsi-vpn1-static-5.5.5.5-200]
Related commands
• default-pw-id
• display l2vpn ldp
• display l2vpn pw
• pw-class
• tunnel-policy
peer auto-discovery
Use peer auto-discovery to enable BGP to exchange VPLS PE information with the specified peer or peer
group.
Use undo peer auto-discovery to disable BGP to exchange VPLS PW information with the specified peer
or peer group.
Syntax
peer { group-name | ip-address } auto-discovery [ non-standard ]
undo peer { group-name | ip-address } auto-discovery
Default
BGP can exchange VPLS PE information with the a BGP L2VPN peer or peer group through RFC 6074
MP_REACH_NLRI.
Views
BGP L2VPN address family view
Predefined user roles
network-admin
mdc-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The
specified peer group must have been created.
ip-address: Specifies a peer by its IP address. The specified peer must have been created.