R211x-HP Flexfabric 11900 MPLS Command Reference

291
undo pwsignaling { ldp | static }
Default
No PW signaling protocol is specified for a VSI.
Views
VSI view
Predefined user roles
network-admin
mdc-admin
Parameters
ldp: Establishes PWs through LDP (FEC 128) and enters VSI LDP signaling view.
static: Establishes PWs statically and enters VSI static configuration view.
Examples
# Configure the VSI vpn1 to use LDP to establish FEC 128 PWs, and enter VSI LDP signaling view.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] pwsignaling ldp
[Sysname-vsi-vpn1-ldp]
Related commands
display l2vpn pw
refresh bgp l2vpn
Use refresh bgp l2vpn to manually soft-reset L2VPN BGP sessions.
Syntax
refresh bgp { ip-address | all | external | group group-name | internal } { export | import } l2vpn
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Soft-resets the L2VPN BGP session to the specified peer.
all: Soft-resets all L2VPN BGP sessions.
external: Soft-resets all L2VPN EBGP sessions.
group group-name: Soft-resets L2VPN BGP sessions to the peers in the peer group specified by its name,
a case-sensitive string of 1 to 47 characters.
internal: Soft-resets all L2VPN IBGP sessions.
export: Soft-resets all outbound L2VPN BGP sessions.