R211x-HP Flexfabric 11900 MPLS Command Reference

23
outgoing-interface interface-type interface-number: Specifies an outgoing interface by its type and
number. The specified interface must be a point-to-point interface.
out-label out-label: Specifies an outgoing label in the range of 16 to 1023.
Usage guidelines
You must enable MPLS on the outgoing interface of the static LSP.
Examples
# Configure a static LSP on the transit node: specify the LSP's name as bj-sh, incoming label as 123 , next
hop address as 202.34.114.7, and outgoing label as 253.
<Sysname> system-view
[Sysname] static-lsp transit bj-sh in-label 123 nexthop 202.34.114.7 out-label 253
Related commands
display mpls static-lsp