R211x-HP Flexfabric 11900 MPLS Command Reference

307
display bgp peer ipv4 vpn-instance
Use display bgp peer ipv4 vpn-instance to display information about BGP peers.
Syntax
display bgp peer ipv4 vpn-instance vpn-instance-name [ group-name log-info | ip-address { log-info |
verbose } | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies the name of a VPN instance, a string of 1 to 31 case-sensitive
characters.
ip-address: Specifies the IP address of a peer. If no peer is specified, this command displays all peers.
verbose: Displays detailed information.
group-name: Specifies the name of a peer group, a string of 1 to 47 case-sensitive characters.
log-info: Displays log information for the specified peer or peer group.
Usage guidelines
If no parameters are specified, this command displays brief information about all BGP peers in the
specified VPN.
Examples
# Display brief information about the BGP peers for the VPN instance vpn1.
<Sysname> display bgp peer ipv4 vpn-instance vpn1
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 200 24 29 0 1 00:18:47 Established
Table 113 Command output
Field Descri
p
tion
Peer IP address of the peer.
AS AS number of the peer group.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of received prefixes.
Up/Down Lasting time of the current BGP session state.