R211x-HP Flexfabric 11900 MPLS Command Reference

309
Field Description
Peer Preferred Value Preferred value specified for the routes from the peer.
# D i s p l a y l o g i n f o r m a t i o n f o r B G P p e e r 10 .1.1.1 i n V P N i n s t a n c e vpn1.
<Sysname> display bgp peer ipv4 vpn-instance vpn1 10.1.1.1 log-info
Peer : 10.1.1.1
Date Time State Notification
Error/SubError
27-Mar-2011 15:36:12 Down Receive notification with error 6/4
Cease/Administrative Reset
27-Mar-2011 15:34:29 Up
Table 115 Command output
Field Description
Peer IP address of the peer.
Date Date on which the notification was sent or received.
Time Time at which the notification was sent or received.
State BGP session state.
Notification
Error/SubError
Error code of the notification, indicating the cause of why the BGP session is down.
• Error—Refers to the error code, which identifies the type of the notification.
• SubError—Refers to the error subcode of the notification, which identifies specific
information about the reported error.
display ip vpn-instance
Use display ip vpn-instance to display information about VPN instances.
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
instance-name vpn-instance-name: Displays information about the specified VPN instance. The
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN instance is specified, the
command displays brief information about all VPN instances.