R211x-HP Flexfabric 11900 MPLS Command Reference

38
Field Descri
p
tion
KA Sent/Rcvd Total number of Keepalive messages sent and received.
Label Adv Mode
Label advertisement mode negotiated. The device only supports the DU
mode.
Graceful Restart
Whether GR is enabled on the peer.
• On—Enabled.
• Off—Disabled.
Reconnect Time Reconnect time negotiated, in seconds.
Recovery Time Recovery time (in seconds) carried in packets sent by the peer.
Loop Detection
Whether loop detection is enabled on the peer.
• On—Enabled.
• Off—Disabled.
Path Vector Limit Maximum Path Vector length configured on the peer.
Discovery Sources Discovery source of the LDP peer.
Targeted Hello
LDP peer discovered by the extended discovery mechanism.
• The address before -> (100.100.100.17 in this example) is the local LSR
ID.
• The address after -> (100.100.100.20 in this example) is the LSR ID of
the peer.
• (Active) indicates that the local LSR is the active end. It actively sends
Targeted Hellos to its peer.
• (Passive) indicates that the local LSR is the passive end. It passively
responds to the Targeted Hellos from its peer.
• (Active, Passive) indicates that the local LSR acts as both the active end
and the passive end.
Vlan-interface17
Interface running LDP basic discovery. The device discovers the LDP peer
by sending Link Hellos out of the interface.
Hello Hold Time Hello hold time negotiated, in seconds.
Hello Interval Current Hello interval, in milliseconds.
Label Acceptance Policy
Label acceptance policy used to filter label mappings received from the
peer.
Session Protection
Whether session protection is enabled.
• On—Enabled.
• Off—Disabled.
State
Session protection state:
• Incomplete—Session protection is not ready.
• Ready—Session protection is ready.
• Protecting—The session is under protection.
Duration
Local session protection duration, in seconds.
Infinite indicates that session protection takes effect permanently.