R211x-HP Flexfabric 11900 MPLS Command Reference

60
Field Descri
p
tion
Class Type
CT of the tunnel. This field is not supported in the current software version
and is reserved for future support.
Tunnel Bandwidth Bandwidth required by the tunnel, in kbps.
Reserved Bandwidth Bandwidth reserved for the tunnel, in kbps.
Setup Priority Tunnel setup priority.
Holding Priority Tunnel holding priority.
Affinity Attr/Mask
Tunnel affinity attribute and mask. This field is not supported in the current
software version and is reserved for future support.
Explicit Path Name
Name of the explicit path referenced by the tunnel. This field is not
supported in the current software version and is reserved for future support.
Backup Explicit Path
Name of the explicit path referenced by the backup tunnel. This field is not
supported in the current software version and is reserved for future support.
Metric Type Link metric type used for tunnel path selection: TE or IGP.
FRR Flag
Whether FRR is enabled. This field is not supported in the current software
version and is reserved for future support.
Backup Bandwidth Flag
Whether the bandwidth and the type of CRLSPs that the bypass tunnel can
protect have been configured. This field is not supported in the current
software version and is reserved for future support.
Backup Bandwidth Type
Class type of the traffic on the primary tunnel that the bypass tunnel can
protect. This field is not supported in the current software version and is
reserved for future support.
Backup Bandwidth
Bandwidth that the bypass tunnel can protect, in kbps. This field is not
supported in the current software version and is reserved for future support.
Route Pinning
Whether route pinning is enabled. This field is not supported in the current
software version and is reserved for future support.
Retry Limit Maximum number of tunnel setup retries.
Retry Interval Tunnel setup retry interval, in seconds.
Reoptimization
Whether tunnel reoptimization is enabled. This field is not supported in the
current software version and is reserved for future support.
Reoptimization Freq
Tunnel reoptimization frequency, in seconds. This field is not supported in
the current software version and is reserved for future support.
Backup Type
CRLSP backup mode:
• None—CRLSP backup is disabled.
• Hot Standby
• Ordinary
Backup LSP ID LSP ID of the backup tunnel.
Auto Bandwidth
State of the automatic bandwidth adjustment function. This field is not
supported in the current software version and is reserved for future support.
Auto Bandwidth Freq
Automatic bandwidth adjustment interval, in seconds. This field is not
supported in the current software version and is reserved for future support.