R211x-HP Flexfabric 11900 MPLS Command Reference

61
Field Descri
p
tion
Min Bandwidth
Minimum bandwidth (in kbps) that can be applied to the tunnel by
automatic bandwidth adjustment. This field is not supported in the current
software version and is reserved for future support.
Max Bandwidth
Maximum bandwidth (in kbps) that can be applied to the tunnel by
automatic bandwidth adjustment. This field is not supported in the current
software version and is reserved for future support.
Collected Bandwidth
Current output rate, in kbps. This field is not supported in the current
software version and is reserved for future support.
mpls te
Use mpls te to enable MPLS TE for the local node and enter MPLS TE view.
Use undo mpls te to disable MPLS TE for the local node.
Syntax
mpls te
undo mpls te
Default
MPLS TE is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Disabling MPLS TE also deletes all CRLSPs and MPLS TE configurations on the device.
Examples
# Enable MPLS TE for the local node and enter MPLS TE view.
<Sysname> system-view
[Sysname] mpls lsr-id 1.1.1.9
[Sysname] mpls te
[Sysname-te]
Related commands
mpls te enable
mpls te backup
Use mpls te backup to enable CRLSP backup and specify the backup mode for a tunnel.
Use undo mpls te backup to restore the default.