R211x-HP Flexfabric 11900 MPLS Command Reference

68
Use undo mpls te signaling to restore the default.
Syntax
mpls te signaling { rsvp-te | static }
undo mpls te signaling
Default
MPLS TE uses RSVP-TE to establish tunnels.
Views
Tunnel interface view
Predefined user roles
network-admin
mdc-admin
Parameters
rsvp-te: Uses the RSVP-TE signaling protocol to establish a tunnel.
static: Uses a static CRLSP to establish a tunnel.
Usage guidelines
To use RSVP-TE to establish an MPLS TE tunnel, you must enable MPLS TE and RSVP on each node and
interface that the MPLS TE tunnel traverses.
To establish an MPLS TE tunnel over a static CRLSP, you must configure the tunnel to reference the static
CRLSP by using the mpls te static-cr-lsp command.
Examples
# Use RSVP-TE to establish the MPLS TE tunnel 0.
<Sysname> system-view
[Sysname] interface tunnel 0 mode mpls-te
[Sysname-Tunnel0] mpls te signaling rsvp-te
Related commands
• display mpls te tunnel-interface
• mpls te static-cr-lsp
mpls te static-cr-lsp
Use mpls te static-cr-lsp to reference a static CRLSP for a tunnel.
Use undo mpls te static-cr-lsp to remove the reference of the specified static CRLSP.
Syntax
mpls te static-cr-lsp lsp-name
undo mpls te static-cr-lsp lsp-name
Default
A tunnel does not reference any static CRLSP.
Views
Tunnel interface view