R211x-HP Flexfabric 11900 MPLS Command Reference
90
1025 Flag: 0x01 (Global label)
5.5.5.9/32 Flag: 0x20 (No FRR/Node-ID)
57.40.40.3/32 Flag: 0x00 (No FRR)
57.40.40.1/32 Flag: 0x40 (No FRR/In-Int)
3 Flag: 0x01 (Global label)
3.3.3.9/32 Flag: 0x20 ((No FRR/Node-ID)
Fast Reroute protection: None
Table 30 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Direction
Tunnel direction:
• Unidirectional—Unidirectional tunnel.
• Bidirectional, Downstream—Forward CRLSP of a bidirectional tunnel.
• Bidirectional, Upstream—Backward CRLSP of a bidirectional tunnel.
Exclude-any
Affinity representing a set of attribute filters. Matching any filter renders a
link unacceptable.
Include-any
Affinity representing a set of attribute filters. Matching any filter renders a
link acceptable.
Include-all
Affinity representing a set of attribute filters. All filters must be present for
a link to be acceptable.
Class type CT of the LSP.
RRO number
Number of Record Route Objects (RROs). If the number is not 0, the
subsequent output displays the IP addresses or labels recorded in the
RROs.
The RRO information is displayed only when route recording is configured
on the tunnel interface.
Flag
Flag value and its meaning in an RRO:
• No FRR—FRR is not configured.
• FRR Avail—FRR is available. This flag is not supported in the current
software version and is reserved for future support.
• In use—FRR has occurred. This flag is not supported in the current
software version and is reserved for future support.
• BW—Bandwidth protection. This flag is not supported in the current
software version and is reserved for future support.
• Node-Prot—Node protection. This flag is not supported in the current
software version and is reserved for future support.
• Node-ID—The IP address in the RRO is the LSR ID of the node.
• In-Int—The IP address in the RRO is address of the incoming interface.
• Global label—Per-platform label space.
Fast Reroute protection
Whether the tunnel has been bound to an FRR bypass tunnel. This field is
not supported in the current software version and is reserved for future
support.










