R211x-HP Flexfabric 11900 MPLS Configuration Guide

287
Ste
p
Command Remarks
4. Configure a static PW,
and enter VSI static PW
view.
peer ip-address [ pw-id pw-id ]
in-label label-value out-label
label-value [ no-split-horizon |
pw-class class-name |
tunnel-policy
tunnel-policy-name ] *
By default, no static PW is configured.
If you have configured a default PW ID for
the VSI with the default-pw-id command,
you can use the default PW ID without
providing a PW ID in the peer command. If
no default PW ID is configured, you must
provide a PW ID in the peer command.
Configuring an LDP PW
Before you configure an LDP PW, enable global and interface MPLS LDP on the PE. For information about
MPLS LDP configuration, see "Configuring LDP."
T
o configure an LDP PW:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSI view.
vsi vsi-name N/A
3. Specify LDP signaling
for PWs, and enter VSI
LDP signaling view.
pwsignaling ldp
By default, no PW signaling protocol is
specified.
4. Configure an LDP PW,
and enter VSI LDP PW
view.
peer ip-address [ pw-id pw-id ]
[ no-split-horizon | pw-class
class-name | tunnel-policy
tunnel-policy-name ] *
By default, no LDP PW is configured.
If you have configured a default PW ID
for the VSI with the default-pw-id
command, you can use the default PW
ID without providing a PW ID in the peer
command. If no default PW ID is
configured, you must provide a PW ID
in the peer command.
Configuring a BGP PW
To configure a BGP PW, perform the following configurations on PEs:
• Configure BGP to advertise VPLS label block information.
• Create a BGP PW.
Configuring BGP to advertise VPLS label block information
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable BGP and enter BGP
view.
bgp as-number By default, BGP is not enabled.
3. Configure the remote PE as a
BGP peer.
peer { group-name | ip-address }
as-number as-number
By default, no BGP peer is
configured.
4. Create and enter BGP L2VPN
address family view.
address-family l2vpn
By default, BGP L2VPN address
family view is not created.