R211x-HP Flexfabric 11900 MPLS Configuration Guide

288
Ste
p
Command Remarks
5. Enable BGP to exchange
L2VPN information with the
specified peer or peer group.
peer { group-name | ip-address }
enable
By default, BGP cannot exchange
L2VPN information with any peer
or peer group.
6. Enable BGP to exchange
label block information with
the specified peer or peer
group.
peer { group-name | ip-address }
signaling
By default, BGP can exchange
label block information with a BGP
L2VPN peer or peer group.
7. (Optional.) Permit the local AS
number to appear in routes
from the specified peer or
peer group and specify the
appearance times.
peer { group-name | ip-address }
allow-as-loop [ number ]
By default, the local AS number is
not allowed in routes from a peer
or peer group.
8. (Optional.) Enable route
target-based filtering of
incoming BGP L2VPN
information.
policy vpn-target
By default, route target-based
filtering of incoming BGP L2VPN
information is enabled.
9. (Optional.) Configure the
router as a route reflector and
specify a peer or peer group
as its client.
peer { group-name | ip-address }
reflect-client
By default, no route reflector or
client is configured.
10. (Optional.) Enable L2VPN
information reflection
between clients.
reflect between-clients
By default, L2VPN information
reflection is enabled between
clients.
11. (Optional.) Configure the
cluster ID of the route reflector.
reflector cluster-id { cluster-id |
ip-address }
By default, a route reflector uses its
own router ID as the cluster ID.
12. (Optional.) Configure the
filtering of reflected L2VPN
information.
rr-filter
extended-community-number
By default, the route reflector does
not filter reflected L2VPN
information.
13. (Optional.) Return to user
view.
return
N/A
14. (Optional.) Soft-reset L2VPN
BGP sessions.
refresh bgp { ip-address | all |
external | group group-name |
internal } { export | import } l2vpn
N/A
15. (Optional.) Reset L2VPN BGP
sessions.
reset bgp { as-number | ip-address
| all | external | group
group-name | internal } l2vpn
N/A
For more information about the peer as-number, peer enable, peer allow-as-loop, peer reflect-client,
reflect between-clients, and reflector cluster-id commands, see Layer 3—IP Routing Command
Reference.
Creating a BGP PW
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSI view.
vsi vsi-name N/A