R211x-HP Flexfabric 11900 MPLS Configuration Guide

Tunnel State : Up (Main CRLSP up, Reverse CRLSP up)

Tunnel Attributes :

LSP ID : - Tunnel ID : 8

Admin State : Normal

Ingress LSR ID : - Egress LSR ID : -

Signaling : RSVP-TE Static CRLSP Name : -

Resv Style : FF

Tunnel mode : Co-routed, passive

Reverse-LSP name : -

Reverse-LSP LSR ID : 1.1.1.9 Reverse-LSP Tunnel ID: 1

Class Type : - Tunnel Bandwidth : -

Reserved Bandwidth : -

Setup Priority : - Holding Priority : -

Affinity Attr/Mask : -/-

Explicit Path : -

Backup Explicit Path : -

Metric Type : -

Record Route : - Record Label : -

FRR Flag : - Backup Bandwidth Flag: -

Backup Bandwidth Type: - Backup Bandwidth : -

Route Pinning : -

Retry Limit : - Retry Interval : -

Reoptimization : - Reoptimization Freq : -

Backup Type : - Backup LSP ID : -

Auto Bandwidth : - Auto Bandwidth Freq : -

Min Bandwidth : - Max Bandwidth : -

Collected Bandwidth : -

# Execute the display mpls lsp verbose command on Switch A to display detailed information about the

bidirectional MPLS TE tunnel.

[SwitchA] display mpls lsp verbose

Destination : 4.4.4.9

FEC : 1.1.1.9/1/30478

Protocol : RSVP

LSR Type : Ingress

Service : -

NHLFE ID : 1027

State : Active

Out-Label : 1149

Nexthop : 10.1.1.2

Out-Interface: Vlan1

Destination : 4.4.4.9

FEC : 1.1.1.9/1/30478

Protocol : RSVP

LSR Type : Egress

Service : -

In-Label : 1151

State : Active