R211x-HP Flexfabric 11900 MPLS Configuration Guide

ket, press CTRL_C to break

1 10.1.1.2 (10.1.1.2) 1.000 ms 1.000 ms 1.000 ms

2 * * *

# Shut down interface VLAN-interface 2 on Switch B, and then tracert the tunnel destination. The output

shows that packets are forwarded on the CRLSP that traverses Switch D.

[SwitchA] tracert –a 1.1.1.9 3.3.3.9

traceroute to 3.3.3.9 (3.3.3.9) from 9.1.1.1, 30 hops at most, 40 bytes each pac

ket, press CTRL_C to break

1 30.1.1.2 (30.1.1.2) 3.000 ms 7.000 ms 3.000 ms

2 * * *

# Execute the display mpls lsp command on Switch A. The output shows that only one CRLSP exists on the

switch.

[SwitchA] display mpls lsp

FEC Proto In/Out Label Interface/Out NHLFE

1.1.1.9/3/48984 RSVP -/1150 Vlan4

30.1.1.2 Local -/- Vlan4

# Execute the display ip routing-table command on Switch A. The output shows a static route entry with

interface Tunnel 3 as the output interface.