R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

104
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by engineid.
When an SNMPv3 user is created, the system records the local SNMP entity engine ID. The user
becomes invalid when the engine ID changes and becomes valid again when the recorded engine ID is
restored.
group group-name: Displays SNMPv3 user information for a specified SNMP group name. The group
name is case-sensitive.
username user-name: Displays information about the specified SNMPv3 user. The username is
case-sensitive.
Usage guidelines
This command displays only SNMPv3 users that you have created by using the snmp-agent usm-user v3
command. To display SNMPv1 or SNMPv2c users created by using the snmp-agent usm-user { v1 | v2c }
command, use the display snmp-agent community command.
Examples
# Display information about all SNMPv3 users.
<Sysname> display snmp-agent usm-user
Username: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Username: userv3code
Group name: groupv3code
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Table 30 Command output
Field Descri
p
tion
Username SNMP username.
Group name SNMP group name.
Engine ID Engine ID that the SNMP agent used when the SNMP user was created.