R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

106
Usage guidelines
For an interface to generate linkUp/linkDown notifications when its state changes, you must also enable
the linkUp/linkDown notification function globally using the snmp-agent trap enable standard
[ linkdown | linkup ] * command.
Examples
# Enable port Ten-GigabitEthernet 1/0/1 to send linkUp/linkDown SNMP traps to 10.1.1.1 in the
community public.
<Sysname> system-view
[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] enable snmp trap updown
Related commands
• snmp-agent target-host
• snmp-agent trap enable
snmp-agent
Use snmp-agent to enable the SNMP agent.
Use undo snmp-agent to disable the SNMP agent.
Syntax
snmp-agent
undo snmp-agent
Default
SNMP agent is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The snmp-agent command is optional for an SNMP configuration task. The SNMP agent is automatically
enabled when you execute any command that begins with snmp-agent except for the snmp-agent
calculate-password command.
Examples
# Enable the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent