R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

108
The encrypted key is: 09659EC5A9AE91BA189E5845E1DDE0CC
Related commands
• snmp-agent local-engineid
• snmp-agent usm-user v3
snmp-agent community
Use snmp-agent community to configure an SNMP community.
Use undo snmp-agent community to delete an SNMP community.
Syntax
snmp-agent community { read | write } [ simple | cipher ] community-name [ mib-view view-name ] [ acl
acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent community { read | write } [ cipher ] community-name
Default
No SNMP community exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
read: Assigns the specified community the read only access to MIB objects. A read-only community can
only inquire MIB information.
write: Assigns the specified community the read and write access to MIB objects. A read and write
community can configure MIB information.
simple: Sets a community name in plain text. For security purposes, this community name is saved in
cipher text.
cipher: Sets and saves the community name in cipher text.
community-name: Sets a case-sensitive community name. In plain text, the community name must be a
string of 1 to 32 characters. In cipher text, the community name must be a string of 33 to 73 characters.
Input a string as escape characters after a backslash (\).
mib-view view-name: Specifies the MIB view available for the community. The view-name argument
represents a MIB view name, a string of 1 to 32 characters. A MIB view represents a set of accessible
MIB objects. If no MIB view is specified, the specified community can access the MIB objects in the
default MIB view ViewDefault.
acl acl-number: Specifies a basic IPv4 ACL to filter NMSs by source IPv4 address. The acl-number
argument represents an ACL number in the range of 2000 to 2999. In the specified community, only
NMSs with an IPv4 address permitted in the ACL can access the SNMP agent. If no ACL is specified, the
specified ACL does not exist, or the specified ACL does not have any rules, all NMSs in the SNMP
community can access the SNMP agent. For detailed information about ACL, see ACL and QoS
Configuration Guide.