R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

114
Predefined user roles
network-admin
mdc-admin
Parameters
engineid: Specifies an SNMP engine ID as a hexadecimal string. It must comprise an even number of
hexadecimal characters, in the range of 10 to 64. All-zero and all-F strings are invalid.
Usage guidelines
An SNMP engine ID uniquely identifies an SNMP entity in an SNMP managed network. Make sure the
local SNMP engine ID is unique within your SNMP managed network to avoid communication
problems.
If you have configured SNMPv3 users, change the local SNMP engine ID only when necessary. The
change can void the SNMPv3 usernames and encrypted keys you have configured.
Examples
# Change the local engine ID to 123456789A.
<Sysname> system-view
[Sysname] snmp-agent local-engineid 123456789A
Related commands
• display snmp-agent local-engineid
• snmp-agent usm-user
snmp-agent log
Use snmp-agent log to enable logging SNMP operations.
Use undo snmp-agent log to disable logging SNMP operations.
Syntax
snmp-agent log { all | get-operation | set-operation }
undo snmp-agent log { all | get-operation | set-operation }
Default
SNMP logging is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Enables logging SNMP Get and Set operations.
get-operation: Enables logging SNMP Get operations.
set-operation: Enables logging SNMP Set operations.