R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

115
Usage guidelines
Use SNMP logging to record the SNMP operations performed on the SNMP agent for auditing NMS
behaviors. The SNMP agent sends log data to the information center. You can configure the information
center to output the data to a specific destination as needed.
Examples
# Enable logging SNMP Get operations.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging SNMP Set operations.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
snmp-agent mib-view
Use snmp-agent mib-view to create or update a MIB view.
Use undo snmp-agent mib-view to delete a MIB view.
Syntax
snmp-agent mib-view { excluded | included } view-name oid-tree [ mask mask-value ]
undo snmp-agent mib-view view-name
Default
The system creates the ViewDefault view when the SNMP agent is enabled. In this default MIB view, all
MIB objects in the iso subtree but the snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees are
accessible.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
excluded: Denies access to any node in the specified MIB subtree.
included: Permits access to all the nodes in the specified MIB subtree.
view-name: Specify a view name, a string of 1 to 32 characters.
oid-tree: Specifies a MIB subtree by its root node's OID (for example, 1.4.5.3.1) or object name (for
example, system). An OID is a dotted numeric string that uniquely identifies an object in the MIB tree.
mask mask-value: Sets a MIB subtree mask, a hexadecimal string. Its length must be an even number in
the range of 2 to 32.
Usage guidelines
A MIB view represents a set of MIB objects (or MIB object hierarchies) with certain access privilege. The
MIB objects included in the MIB view are accessible while those excluded from the MIB view are
inaccessible.