R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

130
group-name: Specifies an SNMPv3 group name, a case-sensitive string of 1 to 32 characters.
remote { ip-address | ipv6 ipv6-address }: Specifies the IPv4 or IPv6 address of the remote SNMP entity.
To send SNMPv3 informs to an NMS, you must specify the IPv4 or IPv6 address of the NMS in the
snmp-agent usm-user v3 command and map the IPv4 or IPv6 address to the SNMP engine ID of the
NMS by using the snmp-agent remote command.
vpn-instance vpn-instance-name: Specifies the VPN for the target host receiving SNMP notifications. The
vpn-instance-name argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31
characters. If this parameter is not specified, the target host is in public network.
cipher: Specifies that auth-password and priv-password are encrypted keys, which can be calculated to
a hexadecimal string by using the snmp-agent calculate-password command.
simple: Specifies that auth-password and priv-password are plaintext keys.
authentication-mode: Specifies an authentication algorithm. MD5 is faster but less secure than SHA.
• md5: Specifies the MD5 authentication algorithm.
• sha: Specifies the SHA-1 authentication algorithm.
auth-password: Specifies a case-sensitive plaintext or encrypted authentication key. In non-FIPS mode, a
plaintext key is a string of 1 to 64 visible characters. In FIPS mode, a plaintext key is a string of 15 to 64
visible characters, which must contain numbers, upper-case letters, lower-case letters, and special
characters. If the cipher keyword is specified, the encrypted authentication key length requirements differ
by authentication algorithm and key string format, as shown in Table 33.
Table 33 Encrypted authentication key length requirements
Authentication
al
g
orithm
Hexadecimal string Non-hexadecimal string
MD5 32 characters 53 characters
SHA 40 characters 57 characters
privacy-mode: Specifies an encryption algorithm for privacy. AES is slower but more secure than DES.
• aes128: Specifies the AES (Advanced Encryption Standard) algorithm.
• des56: Specifies the DES (Data Encryption Standard) algorithm.
priv-password: Specifies a case-sensitive plaintext or encrypted privacy key. In non-FIPS mode, a
plaintext key is a string of 1 to 64 characters. In FIPS mode, a plaintext key is a string of 15 to 64 visible
characters, which must contain numbers, upper-case letters, lower-case letters, and special characters. If
the cipher keyword is specified, the encrypted privacy key length requirements differ by authentication
algorithm and key string format, as shown in Table 34.
Table 34 Encrypted privacy key length requirements
Authentication
al
g
orithm
Encryption
al
g
orithm
Hexadecimal string Non-hexadecimal string
MD5
AES128 or
DES-56
32 characters 53 characters
SHA
AES128 or
DES-56
40 characters 53 characters
acl acl-number: Specifies a basic IPv4 ACL to filter NMSs by source IPv4 address. The acl-number
argument represents an ACL number in the range of 2000 to 2999. Only NMSs with an IPv4 address