R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

132
# Add the user remoteUser for the SNMP remote engine at 10 .1.1.1 t o t h e S N M P v 3 g r o u p testGroup,
enable the authentication and privacy security model for the group, specify the authentication algorithm
SHA-1, the privacy algorithm AES, the plaintext authentication key 123456TESTauth&!, and the plaintext
privacy key 123 456 TESTe nc r& ! for the user.
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 remoteUser testGroup remote 10.1.1.1 simple
authentication-mode sha 123456TESTauth&! privacy-mode aes128 123456TESTencr&!
Related commands
• display snmp-agent usm-user
• snmp-agent calculate-password
• snmp-agent group