R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

133
RMON commands
display rmon alarm
Use display rmon alarm to display entries in the RMON alarm table.
Syntax
display rmon alarm [entry-number]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
entry-number: Specifies an alarm entry index in the range of 1 to 65535. If no entry is specified, the
command displays all entries in the RMON alarm table.
Examples
# Display all entries in the RMON alarm table.
<Sysname> display rmon alarm
AlarmEntry 1 owned by user1 is VALID.
Sample type : absolute
Sampled variable : 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval (in seconds) : 10
Rising threshold : 50(associated with event 1)
Falling threshold : 5(associated with event 2)
Alarm sent upon entry startup : risingOrFallingAlarm
Latest value : 0