R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

139
Sampling record 2 :
dropevents : 0 , octets : 5367
packets : 55 , broadcast packets : 1
multicast packets : 7 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0
collisions : 0 , utilization : 0
Sampling record 3 :
dropevents : 0 , octets : 936
packets : 10 , broadcast packets : 0
multicast packets : 6 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0
collisions : 0 , utilization : 0
HistoryControlEntry 7 owned by user1 is VALID.
Sampled interface : Ten-GigabitEthernet 1/0/1 <ifIndex.117>
Sampling interval : 9(sec) with 1 buckets max
Sampling record 1 :
dropevents : 0 , octets : 1150
packets : 12 , broadcast packets : 0
multicast packets : 8 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0
collisions : 0 , utilization : 0
Table 38 Command output
Field Descri
p
tion
HistoryControlEntry
entry-number owned by
owner is status.
Status and owner of the history control entry.
• entry-number—History control entry index (MIB object historyControlIndex).
• owner—Entry owner (MIB object historyControlOwner).
• status—Entry status (MIB object historyControlStatus):
{ VALID—The entry is valid.
{ UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All history control entries created
from the CLI are valid by default.
The display rmon history command can display invalid entries, but the display
current-configuration and display this commands do not display their settings.
Sampled Interface Sampled interface (MIB object historyControlDataSource).
Sampling interval Sampling interval in seconds (MIB object historyControlInterval).
buckets max
Maximum number of samples that can be saved for the history control entry (MIB
object historyControlBucketsGranted).
If the expected bucket size specified with the rmon history command exceeds the
available history table size, RMON sets the bucket size as closely to the expected
bucket size as is possible.
If the bucket has been full, RMON overwrites the oldest sample with the new
sample.
Sampling record History sample index (MIB object etherHistorySampleIndex).