R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

163
Monitored
performance
metric
Threshold
type
Collect data in Checked Num Over-threshold Num
consecutive
Probes after the
operation starts.
Number of
completed probes.
Number of probe failures.
RTT
accumulate
Packets sent after
the operation
starts.
Number of sent
packets.
Number of packets with
round-trip time exceeding
threshold.
average N/A N/A N/A
jitter-DS/jitter-SD
accumulate
Packets sent after
the operation
starts.
Number of sent
packets.
Number of packets with
the one-way jitter
exceeding the threshold.
average N/A N/A N/A
OWD-DS/OWD-SD N/A
Packets sent after
the operation
starts.
Number of sent
packets.
Number of packets with
the one-way delay
exceeding the threshold.
packet-loss accumulate
Packets sent after
the operation
starts.
Number of sent
packets.
Total packet loss.
ICPIF N/A N/A N/A N/A
MOS N/A N/A N/A N/A
display nqa result
Use display nqa result to display the most recent result of the specified NQA operation.
Syntax
display nqa result [ admin-name operation-tag ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
admin-name operation-tag: Displays the most recent result of an NQA operation. The admin-name
argument represents the name of the administrator who creates the NQA operation, and the
operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string
of 1 to 32 characters that cannot contain hyphens (-). If these two arguments are not specified, the
command displays the result of all NQA operations.