R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

14
Session ID: 36144
Clock stratum: 16
Clock status: configured, insane, valid, unsynced
Reference clock ID: INIT
VPN instance: Not specified
Local mode: sym_active, local poll interval: 6
Peer mode: unspec, peer poll interval: 10
Offset: 0.0000ms, roundtrip delay: 0.0000ms, dispersion: 15937ms
Root roundtrip delay: 0.0000ms, root dispersion: 0.0000ms
Reachabilities:0, sync distance: 15.938
Precision: 2^10, version: 4, source interface: Not specified
Reftime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Orgtime: d17cbb21.0f318106 Tue, May 17 2011 9:15:13.059
Rcvtime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Xmttime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Roundtrip delay samples: 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Offset samples: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Filter order: 0 1 2 3 4 5 6 7
Total sessions: 1
Table 6 Command output
Field Descri
p
tion
Clock source
IPv6 address of the clock source. If this field displays ::, the IPv6
address of the NTP server has not been resolved successfully.
Clock stratum
Stratum level of the NTP server, which determines the clock
precision. The value is in the range of 1 to 16. A lower stratum level
represents higher clock accuracy. A stratum 16 clock is not
synchronized and cannot be used as a reference clock.
Clock status
Status of the clock source corresponding to this association:
• configured—The association was created by a configuration
command.
• dynamic—The association is established dynamically.
• master—The clock source is the primary reference source of the
current system.
• selected—The clock source has survived the clock selection
algorithm.
• candidate—The clock source is the candidate reference source.
• sane—The clock source is available for this association.
• insane—The clock source is not available for this association.
• valid—The clock source is valid, which means the clock source
meets the following requirements: it has passed the
authentication and is being synchronized. Its stratum level is
valid, and its root delay and root dispersion values are within
their ranges.
• invalid—The clock source is invalid.
• unsynced—The clock source has not been synchronized or the
value of the stratum level is invalid.