R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

222
IMPORTANT:
Configure the NQA server only for UDP jitter, TCP, UDP echo, and voice operations.
display nqa server
Use display nqa server status to display NQA server status.
Syntax
display nqa server
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display NQA server status.
<Sysname> display nqa server
nqa server is: enabled
tcp-connect:
IP Address Port Vpn-instance
2.2.2.2 2000 -
udp-echo:
IP Address Port Vpn-instance
3.3.3.3 3000 vpn1
Table 48 Command output
Field Description
tcp-connect Information about the TCP listening service on the NQA server.
udp-echo Information about the UDP listening service on the NQA server.
IP Address IP address specified for the TCP/UDP listening service on the NQA server.
Port Port number specified for the TCP/UDP listening service on the NQA server.
Vpn-instance VPN instance of which the MPLS L3VPN on the NQA server.
nqa server enable
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.