R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

227
Slot 4 Inbound
Monitor port: Ten-GigabitEthernet1/0/3
Mirroring group 2:
Type: Remote source
Status: Incomplete
Mirroring port:
Ten-GigabitEthernet1/0/4 Both
Remote probe VLAN: 1900
Mirroring group 3:
Type: Remote destination
Status: Active
Monitor port: Ten-GigabitEthernet1/0/6
Remote probe VLAN: 1901
Table 49 Command output
Field Descri
p
tion
Mirroring group Number of the mirroring group.
Type
Type of the mirroring group:
• Local.
• Remote source.
• Remote destination.
Status
Status of the mirroring group:
• Active.
• Incomplete—The mirroring group is not configured completely and cannot
take effect.
Mirroring port Source port.
Mirroring CPU Source CPU.
Monitor port Destination port.
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to remove mirroring groups.
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
Default
No mirroring group exists on a device.
Views
System view
Predefined user roles
network-admin