R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

228
mdc-admin
Parameters
group-id: Specifies the number of a mirroring group, in the range of 1 to 4.
local: Specifies a local mirroring group.
remote-destination: Specifies a remote destination group.
remote-source: Specifies a remote source group.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
mirroring-group mirroring-cpu
Use mirroring-group mirroring-cpu to configure source CPUs for a mirroring group.
Use undo mirroring-group mirroring-cpu to remove source CPUs from the mirroring group.
Syntax
In standalone mode:
mirroring-group group-id mirroring-cpu slot slot-number-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-cpu slot slot-number-list
In IRF mode:
mirroring-group group-id mirroring-cpu chassis chassis-number slot slot-number-list { both | inbound |
outbound }
undo mirroring-group group-id mirroring-cpu chassis chassis-number slot slot-number-list
Default
No source CPU is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
group-id: Specifies the number of a mirroring group, in the range of 1 to 4. The mirroring group specified
by the group-id argument must already exist.
slot slot-number-list: Specifies a slot number list of cards that hold the source CPUs, in the format of
slot-number-list = { slot-number [ to slot-number ] }&<1-8>. The slot-number argument specifies the number
of the slot that holds the card. &<1-8> indicates that you can specify up to eight slot numbers or number
ranges. When you use to to specify a slot number range, the end slot number must be equal to or greater
than the start slot number. (In standalone mode.)