R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

16
Field Descri
p
tion
Reachabilities
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
sync distance
Synchronization distance relative to the upper-level clock, in
seconds, and calculated from dispersion and roundtrip delay
values.
Precision Accuracy of the system clock.
version NTP version in the range of 1 to 4.
source interface
Source interface.
If the source interface is not specified, this field is Not specified.
Reftime Reference timestamp in the NTP message.
Orgtime Originate timestamp in the NTP message.
Rcvtime Receive timestamp in the NTP message.
Xmttime Transmit timestamp in the NTP message.
Filter order Dispersion information.
Reference clock status
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock as a
reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as working
abnormally.
Total sessions Total number of associations.
display ntp-service sessions
Use display ntp-service sessions to display information about all IPv4 NTP associations.
Syntax
display ntp-service sessions [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
verbose: Displays detailed information about all IPv4 NTP associations. If you do not specify this
keyword, the command displays only brief information about the NTP associations.