R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

256
display kernel deadloop configuration [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. Without this option, the command displays kernel
thread deadloop detection configuration for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. Without this option,
the command displays kernel thread deadloop detection configuration for the global active MPU. (In IRF
mode.)
Examples
# Display kernel thread deadloop detection configuration.
<Sysname> display kernel deadloop configuration
Thread dead loop detection: Enabled
Dead loop timer (in seconds): 60
Threads excluded from monitoring: 1
TID: 15 Name: co0
Table 54 Command output
Field Descri
p
tion
Dead loop timer (in seconds): n
Time interval (in seconds) to identify a kernel thread deadloop. A kernel
thread deadloop occurs if a kernel thread runs more than n seconds.
Threads excluded from monitoring
Kernel threads excluded from kernel thread deadloop detection. This
field appears only if the monitor kernel deadloop exclude-thread
command is configured.
Name Kernel thread name.
TID Kernel thread number.
No thread is excluded from
monitoring
All kernel threads are monitored by kernel thread deadloop detection.
display kernel exception
Use display kernel exception to display kernel thread exception information.
Syntax
In standalone mode:
display kernel exception show-number [ offset ] [ verbose ] [ slot slot-number ]
In IRF mode:
display kernel exception show-number [ offset ] [ verbose ] [ chassis chassis-number slot slot-number ]
Views
Any view