R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

269
Table 58 Command output
Field Descri
p
tion
JID Job ID of a process. It never changes.
PID Number of a process.
%CPU CPU usage in percentage (%).
%MEM Memory usage in percentage (%).
STAT
State of a process:
• R—Running.
• S—Sleeping.
• T—Traced or stopped.
• D—Uninterruptible sleep.
• Z—Zombie.
PRI Priority of a process for scheduling.
TTY TTY used by a process. It displays a hyphen (-) for non-default MDCs.
HH:MM:SS Running time since the latest start.
COMMAND
Name and parameters of a process. If square brackets ([ ]) exist in a process name, the
process is a kernel thread.
display process cpu
Use display process cpu to display CPU usage for all processes.
Syntax
In standalone mode:
display process cpu [ slot slot-number ]
In IRF mode:
display process cpu [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. Without this option, the command displays CPU
usage for all processes on the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. Without this option,
the command displays CPU usage for all processes on the global active MPU. (In IRF mode.)