R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

272
display process memory
Use display process memory to display memory usage for all user processes.
Syntax
In standalone mode:
display process memory [ slot slot-number ]
In IRF mode:
display process memory [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. Without this option, the command displays memory
usage for all user processes on the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. Without this option,
the command displays memory usage for all user processes on the global active MPU. (In IRF mode.)
Usage guidelines
When a user process starts, it requests the following types of memory from the system:
• Text memory—Stores code for the user process.
• Data memory—Stores data for the user process.
• Stack memory—Stores temporary data.
• Dynamic memory—Heap memory dynamically assigned and released by the system according to
the needs of the user process. To view dynamic memory information, execute the display process
memory heap command.
Examples
# Display memory usage for all user processes.
<Sysname> display process memory
JID Text Data Stack Dynamic Name
1 384 1800 16 36 scmd
2 0 0 0 0 [kthreadd]
3 0 0 0 0 [ksoftirqd/0]
4 0 0 0 0 [watchdog/0]
5 0 0 0 0 [events/0]
6 0 0 0 0 [khelper]
29 0 0 0 0 [kblockd/0]
49 0 0 0 0 [vzmond]
52 0 0 0 0 [pdflush]