R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

283
Usage guidelines
You can disable kernel thread starvation detection for up to 128 kernel threads by executing the
command.
HP recommends using the default settings. Inappropriate use of this command can cause service
problems or system breakdown. Make sure you understand the impact of this command on your network
before you use it.
Examples
# Disable kernel thread starvation detection for kernel thread 15.
<Sysname> system-view
[Sysname] monitor kernel starvation exclude-thread 15
Related commands
• display kernel starvation
• display kernel starvation configuration
• monitor kernel starvation time
• monitor kernel starvation enable
monitor kernel starvation time
Use monitor kernel starvation time to set the interval for identifying a kernel thread starvation.
Use undo monitor kernel starvation time to restore the default.
Syntax
In standalone mode:
monitor kernel starvation time interval [ slot slot-number ]
undo monitor kernel starvation time [ slot slot-number ]
In IRF mode:
monitor kernel starvation time interval [ chassis chassis-number slot slot-number ]
undo monitor kernel starvation time [ chassis chassis-number slot slot-number ]
Default
The interval for identifying a kernel thread starvation is 120 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time interval: Specifies the interval for identifying a kernel thread starvation, in the range of 1 to 65535
seconds.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do not
specify this option, the global active MPU is specified. (In IRF mode.)