R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

298
In IRF mode:
diagnostic monitor enable chassis chassis-number slot slot-number-list [ test test-name ]
undo diagnostic monitor enable chassis chassis-number slot slot-number-list [ test test-name ]
Default
By default, all monitoring diagnostic tests are disabled.
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number-list: Specifies a space-separated list of up to 7 slot numbers. Each slot number specifies
a card or a range of cards in the form of slot-number-list = { slot-number [ to slot-number ] }&<1-7>. (In
standalone mode.)
chassis chassis-number: Specifies an IRF member device by its ID. (In IRF mode.)
slot slot-number-list: Specifies a space-separated list of up to 7 slot numbers. Each slot number specifies
a card or a range of cards in the form of slot-number-list = { slot-number [ to slot-number ] }&<1-7>. (In
IRF mode.)
test test-name: Specifies a test by its name, a case-insensitive string of 1 to 31 characters. If you do not
specify this option, the command enables all monitoring diagnostic tests on the specified cards.
Usage guidelines
Monitoring diagnostics enable the system to periodically run diagnostic tests to detect hardware faults
and record test results. Monitoring diagnostics only execute non-disruptive tests.
Disruptive diagnostic tests that are being executed affect device operation or even disable certain
functions, but non-disruptive diagnostic tests do not.
Examples
# (In standalone mode.) Enable test HGMonitor on card 10.
<sysname> system-view
[sysname] diagnostic monitor enable slot 10 test HGMonitor
# (In IRF mode.) Enable test HGMonitor on card 10 of IRF member device 2.
<sysname> system-view
[sysname] diagnostic monitor enable chassis 2 slot 10 test HGMonitor
Related commands
diagnostic monitor interval
diagnostic monitor interval
Use diagnostic monitor interval to configure an execution interval for monitoring diagnostic tests.
Use undo diagnostic monitor interval to restore the default.
Syntax
In standalone mode: