R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

301
# (In IRF mode.) Simulate test HGMonitor as failed on card 10 of IRF member device 1.
<sysname> diagnostic simulation chassis 1 slot 10 test HGMonitor failure
Related commands
display diagnostic simulation
display diagnostic content
Use display diagnostic content to display information about diagnostic tests.
Syntax
In standalone mode:
display diagnostic content [ slot slot-number ] [ verbose ]
In IRF mode:
display diagnostic content [ chassis chassis-number [ slot slot-number ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, information about
diagnostic tests on all cards is displayed. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the IRF member ID, and the slot-number argument represents the slot number of the
card. If you do not specify an IRF member ID, this command displays information about diagnostic tests
on all devices. If no card is specified, this command displays information about diagnostic tests on all
cards of the device. (In IRF mode.)
verbose: Displays detailed information about diagnostic tests. If you do not specify this keyword, the
command displays brief information about the diagnostic tests.
Examples
# (In standalone mode.) Display brief information about all diagnostic tests on card 10.
<sysname> display diagnostic content slot 10
Diagnostic test suite attributes:
#B/*: Bootup test/NA
#O/*: Ondemand test/NA
#M/*: Monitoring test/NA
#D/*: Disruptive test/Non-disruptive test
#P/*: Per port test/NA
#A/I/*: Monitoring test is active/Monitoring test is inactive/NA
Slot 10:
Name Attributes Interval
HGMonitor
**M*PI 00:00:10