R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

308
diagnostic tests on all devices. If no card is specified, this command clears test results for diagnostic tests
on all cards of the device. (In IRF mode.)
test test-name: Specifies a test by its name, a case-insensitive string of 1 to 31 characters. If you do not
specify this option, test results for all diagnostic tests on the specified card are cleared.
Usage guidelines
This command does not clear the next execution time in detailed test results.
Examples
# (In standalone mode.) Clear test results for test HGMonitor on card 10.
<sysname> reset diagnostic result slot 10 test HGMonitor
# (In IRF mode.) Clear test results for test HGMonitor on card 10 of IRF member device 1.
<sysname> reset diagnostic result chassis 1 slot 10 test HGMonitor
Related commands
display diagnostic result