R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

58
Severity
value
Level Description
Corresponding
keyword in
commands
4 Warning
Warning condition. For example, an interface is
disconnected, or the memory resources are used up.
warning
5 Notification
Normal but significant condition. For example, a terminal
logs in to the device, or the device reboots.
notification
6
Informationa
l
Informational message. For example, a command or a
ping operation is executed.
informational
7 Debug Debugging message. debugging
size buffersize: Specifies the number of latest log messages to be displayed, in the range of 1 to 1024.
Without this keyword, the command displays all log information.
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument specifies the ID of the member device. The slot-number argument specifies the slot number of
the card. (In IRF mode.)
Examples
# (In standalone mode.) Display the state and log information of the log buffer.
<Sysname> display logbuffer slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG /7/SYS_RESTART:System restarted
…
# (In IRF mode.) Display the state and log information of the log buffer.
<Sysname> display logbuffer chassis 0 slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG/7/SYS_RESTART:System restarted
…
Table 15 Command output
Field Descri
p
tion
Log buffer
• Enabled—Logs can be output to the log buffer.
• Disabled—Logs cannot be output to the buffer.
Max buffer size
Maximum number of logs that can be stored in the log
buffer.