R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

64
Use undo info-center diagnostic-logfile frequency to restore the default saving interval.
Syntax
info-center diagnostic-logfile frequency freq-sec
undo info-center diagnostic-logfile frequency
Default
The default saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
freq-sec: Specifies the interval at which the system saves diagnostic logs from the diagnostic log file buffer
to the diagnostic log file, in seconds. The value range is 10 to 86400, and the default is 86400.
Usage guidelines
The system saves diagnostic logs in the diagnostic log buffer, and outputs the buffered diagnostic logs to
the diagnostic log file at the specified interval.
Examples
# Configure the system to save diagnostic logs from the diagnostic log file buffer to the diagnostic log file
every 600 seconds.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile frequency 600
Related commands
info-center diagnostic-logfile enable
info-center diagnostic-logfile quota
Use info-center diagnostic-logfile quota to set the maximum size of the diagnostic log file.
Use undo info-center diagnostic-logfile quota to restore the default.
Syntax
info-center diagnostic-logfile quota size
undo info-center diagnostic-logfile quota
Default
The maximum size of the diagnostic log file is 10 MB.
Views
System view
Predefined user roles
network-admin
mdc-admin