R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

68
Default
Logs are allowed to be output to the log buffer.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure output of log information to the log buffer.
<Sysname> system-view
[Sysname] info-center logbuffer
Related commands
• display logbuffer
• info-center enable
info-center logbuffer size
Use info-center logbuffer size to set the maximum number of logs that can be stored in the log buffer.
Use undo info-center logbuffer size to restore the default.
Syntax
info-center logbuffer size buffersize
undo info-center logbuffer size
Default
The log buffer can store up to 512 logs.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
buffersize: Specifies the maximum number of logs that can be stored in the log buffer. The value range
is 0 to 1024, and the default is 512.
Examples
# Set the maximum number of logs that can be stored in a log buffer to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
# Restore the default maximum log buffer size.
<Sysname> system-view
[Sysname] undo info-center logbuffer size