R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

70
Parameters
freq-sec: Specifies the interval at which the system saves logs to the log file, in the range of 1 to 86400
seconds. The default setting is 86400 seconds.
Usage guidelines
With this command executed, the system saves logs in the log file buffer to the log file at the specified
interval.
Examples
# Set the interval for saving logs to the log file to 60000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
Related commands
info-center logfile enable
info-center logfile size-quota
Use info-center logfile size-quota to set the maximum size of the log file.
Use undo info-center logfile size-quota to restore the default.
Syntax
info-center logfile size-quota size
undo info-center logfile size-quota
Default
The maximum size of the log file is 10 MB.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
size: Specifies the maximum size of the log file, in MB.
Usage guidelines
When the log file is full, the system overwrites the earliest logs in the log file with new logs.
Examples
# Set the maximum size of the log file to 6 MB.
<Sysname> system-view
[Sysname] info-center logfile size-quota 6
Related commands
info-center logfile enable