R211x-HP Flexfabric 11900 Network Management and Monitoring Command Reference

78
(In IRF mode.) The configuration made by this command cannot survive an IRF reboot or a global
active/standby switchover in an IRF fabric.
Examples
# Set the directory to save the security log file as flash:/test.
<Sysname> mkdir test
Creating directory flash:/test... Done.
<Sysname> system-view
[Sysname] info-center security-logfile directory flash:/test
info-center source
Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor } { deny
| level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
Default
0 lists the default output rules.
Table 19 Default output rules
Destination Source modules Common log Diagnostic log Hidden log
Console All supported modules debugging Disabled Disabled
Monitor
terminal
All supported modules debugging Disabled Disabled
Log host All supported modules informational Disabled informational
Log buffer All supported modules informational Disabled informational
Log file All supported modules informational Disabled informational
Diagnostic
log file
All supported modules,
cannot be filtered
Disabled
Debugging, which
cannot be filtered
Disabled
Views
System view
Predefined user roles
network-admin
mdc-admin