R211x-HP Flexfabric 11900 Network Management and Monitoring Configuration Guide

123
Ste
p
Command Remarks
11. Configure the source IPv4
or IPv6 address for probe
packets.
• IPv4 address:
source ip ip-address
• IPv6 address:
source ipv6 ipv6-address
By default, no source IP address is
configured.
The specified source IP address must be the
IP address of a local interface, and the
interface must be up. Otherwise, no probe
packets can be sent out.
Displaying and maintaining NQA
Execute display commands in any view.
Task Command
Display history records of NQA operations. display nqa history [ admin-name operation-tag ]
Display the current monitoring results of
reaction entries.
display nqa reaction counters [ admin-name operation-tag
[ item-number ] ]
Display the most recent result of the NQA
operation.
display nqa result [ admin-name operation-tag ]
Display NQA statistics. display nqa statistics [ admin-name operation-tag ]
Display NQA server status. display nqa server status