R211x-HP Flexfabric 11900 Network Management and Monitoring Configuration Guide

78
Ste
p
Command Remarks
8. (Optional.) Create or update a
MIB view.
snmp-agent mib-view { excluded |
included } view-name oid-tree
[ mask mask-value ]
By default, the MIB view
ViewDefault is predefined. In this
view, all the MIB objects in the iso
subtree but the snmpUsmMIB,
snmpVacmMIB, and
snmpModules.18 subtrees are
accessible.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB sub-tree masks
multiple times, the most recent
configuration takes effect. Except
for the four sub-trees in the default
MIB view, you can create up to
16 unique MIB view records.
9. Create an SNMPv3 group.
• In non-FIPS mode:
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view
view-name ] [ write-view
view-name ] [ notify-view
view-name ] [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
• In FIPS mode:
snmp-agent group v3
group-name { authentication |
privacy } [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
By default, no SNMP group
exists.
10. (Optional.) Create an SNMP
context.
snmp-agent context context-name
By default, no SNMP context is
configured on the device.
11. (Optional.) Convert a plaintext
key to an encrypted key.
• In non-FIPS mode:
snmp-agent calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid engineid }
• In FIPS mode:
snmp-agent calculate-password
plain-password mode sha
{ local-engineid |
specified-engineid engineid }
N/A