R211x-HP Flexfabric 11900 Network Management and Monitoring Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP FlexFabric 11000 Switch Products

100

Ste

Command

Remarks

3. Create an entry for

the interface in the

RMON statistics

table.

rmon statistics entry-number [ owner

text ]

By default, the RMON statistics table does

not contain entries.

You can create one statistics entry for

each Ethernet interface, and up to 100

statistics entries on the device. After the

entry limit is reached, you cannot add

new entries.

Creating an RMON history control entry

You can configure multiple history control entries for one interface, but you must make sure their entry

numbers and sampling intervals are different.

You can create a history control entry successfully even if the specified bucket size exceeds the available

history table size. RMON will set the bucket size as closely to the expected bucket size as possible.

To create an RMON history control entry:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter Layer 2 Ethernet

interface view or

Layer 3 Ethernet

interface view.

interface interface-type

interface-number

N/A

3. Create an entry for

the interface in the

RMON history

control table.

rmon history entry-number buckets

number interval sampling-interval

[ owner text ]

By default, the RMON history control

table does not contain entries.

You can create up to 100 history control

entries.

Configuring the RMON alarm function

When you configure the RMON alarm function, follow these guidelines:

• To send notifications to the NMS when an alarm is triggered, configure the SNMP agent as

described in "Configuring SNMP" before configuring the RMON alarm function.

• For a new event, alarm, or private alarm entry to be created:

{ The entry must not have the same set of parameters as an existing entry.

{ The maximum number of entries is not reached.

Table 17 sho

ws the parameters to be compared for duplication and the entry limits.

Table 17 RMON configuration restrictions

Entry Parameters to be compared

Maximum number

of entries

Event

• Event description (description string)

• Event type (log, trap, logtrap, or none)

• Community name (security-string)